What Can an OBD2 Scanner Do for Me?

Car Scanner Functions | Foxwell

Owning an OBD2 scanner from Foxwell can be invaluable for any car owner. Imagine having something that talks directly with your vehicle and reports any issues; let's break down some of its key capabilities more comprehensively:

Diagnosing Engine Problems

All System Car Scanner | Foxwell

The check engine light suddenly illuminates. Instead of panicking, grab your Foxwell NT809BT OBD2 scanner, plug it in, and it quickly provides you with an error code that tells you what's up - here are a few examples:

  • Misfire Detection: Imagine this: your car starts shaking while idling, and your scanner displays a P0300 code. This indicates an intermittent misfire occurring in one or more cylinders - from lousy spark plugs to malfunctioning ignition coils or blocked fuel injectors - meaning a random misfire occurring randomly within its engine compartments. Now, with this information at your fingertips, you know exactly where to look.
  • Oxygen Sensor Issues: Receiving a P0171 code means your engine is running too lean (too much air and insufficient fuel). This could be caused by a vacuum leak or a dirty mass air flow sensor; instead of guessing, now you know precisely which areas to check.
  • Catalytic Converter Problems: If your P0420 code appears, it indicates that your catalytic converter is no longer operating efficiently and should be repaired or replaced as soon as possible. Oxygen sensors might also require some attention.

Monitoring Vehicle Performance

Are you curious to keep tabs on how well your car is performing? The Foxwell NT809BT can assist: this car monitor offers a simple solution.

  • Real-Time Data: Get live updates on engine RPMs, fuel efficiency, and more - it's like having access to your car's brain! See exactly how it's running at any given moment.
  • Setting Alerts: With some scanners, it's possible to set alerts for specific conditions—for instance, if engine temperature gets too high or fuel economy decreases —that will enable you to spot small issues before they turn into big problems.

Smog and Emissions Testing

Do you need to pass an emissions test? Your Foxwell OBD2 scanner can ensure you are ready: plug it in, sync it up, and get set!

  • Run Pre-Tests: Before an actual emissions test, using the scanner, you can perform pre-tests to see if your car meets emission standards and address any discrepancies if needed. Our Readiness Monitor checks all necessary systems to ensure they are ready for testing, avoiding last-minute surprises, and clears error codes if required.

Clearing Error Codes

Once a problem has been addressed, your scanner can clear away its error codes:

  • Turn Off the Check Engine Light: Once repairs have been made, utilize a scanner to reset the system and shut off that bothersome check engine light.
  • Verify Fixes: Clearing codes is also an excellent way to verify that the issue has been fixed; if the light returns after clearing codes, something further needs attention.

Resetting Service Indicators

Specific OBD2 scanners allow users to reset service indicators like oil change reminders.

  • Routine Maintenance: Once you've changed the oil or performed other routine maintenance, reset your service indicators so you know when the next service appointment will need to take place.
  • Custom Reminders: Set custom reminders to ensure that your vehicle remains in peak condition and that you don't miss any essential maintenance tasks.

With an OBD2 scanner like the Foxwell NT809BT in your toolbox, having access to an expert mechanic is like having access to one at all times! Understanding what is going on with your car saves time and money as it ensures smooth running.

Dos and Don'ts of Using an OBD2 Scanner


Ensure proper Connection (typically under the dashboard). Likewise, ensure the scanner is connected correctly (usually located under the dashboard).

  • Turn Off the Engine: For optimal results, always connect and disconnect the scanner when the engine is off to prevent any electrical issues from developing.
  • Keep Software Updated: Regularly upgrade the scanner's Software in order to keep pace with new vehicle models, as well as access new features.

Avoid Doing This:

Don't perform these actions to avoid potential electrical issues!

  • Do Not Ignore Error Codes: Rather, pay attention to any error codes generated by your scanner as they provide valuable insights into the condition of your vehicle.
  • Never Drive With Scanner Connected: In general, avoid driving with the scanner connected unless specifically designed to provide real-time monitoring during driving.
  • Avoid Undergoing Major Repairs Yourself: If a scanner reveals major issues, seek professional advice instead of trying the repair yourself. Consult a mechanic instead.
Using Car Scanner | Foxwell


An OBD2 scanner can help save both time and money by quickly diagnosing any potential issues with your vehicle and making easy repairs as they arise. Any serious vehicle owner must own one.


What is an OBD2 scanner?

An OBD2 scanner is a device that connects to your car's onboard computer to read diagnostic trouble codes and monitor vehicle performance.

How can an OBD2 scanner save me money?

By identifying issues early, an OBD2 scanner helps prevent expensive repairs and allows you to fix minor problems before they escalate.

Is an OBD2 scanner easy to use?

Yes, most OBD2 scanners are user-friendly and come with detailed instructions, making it easy for anyone to use and understand the data provided.

Reading next

Car Scanner One Enough | Foxwell
One Enough Car Scanner | Foxwell

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.