Guide for Vehicle Owners--Use a TPMS Sensor Tool

Bidirectional OBD2 Tester | Foxwell

Imagine you're cruising down a scenic highway with your family on a long road trip. Suddenly, a warning light flashes on your dashboard.

Your tire pressure monitoring system (TPMS) alerts you to a potential issue with one of your tires. Without a proper TPMS sensor tool, this warning can turn your relaxing drive into a stressful situation.

Thankfully, with the automotive obd2 scanner and knowledge, you can quickly address the problem and get back to enjoying your journey.

According to a recent survey by the National Highway Traffic Safety Administration (NHTSA), 25% of vehicles on the road have at least one under-inflated tire, significantly increasing the risk of accidents.

Properly inflated tires are not just a matter of safety; they also contribute to fuel efficiency and tire longevity. The NHTSA reports that maintaining correct tire pressure can improve gas mileage by up to 3.3% and extend tire life by thousands of miles.

Given these statistics, understanding how to use a TPMS sensor tool is crucial for every driver. This guide will walk you through the steps, providing you with the knowledge to maintain your vehicle's tire health confidently.

What is a TPMS Sensor Tool?

A TPMS sensor tool is a specialized device used to monitor and manage the tire pressure sensors in your vehicle. These sensors alert you when the tire pressure is too low, which can be crucial for safe driving.

The tool allows you to activate, read, and program these sensors, ensuring they function correctly and providing accurate readings.

One reliable model to consider is the Foxwell GT60 Plus TPMS Sensor Tool. This tool is known for its user-friendly interface and comprehensive functionality, making it an excellent choice for beginners and experienced users.

Full Functions Car Scanner | Foxwell

Why is Using a TPMS Sensor Tool Important?

Using a TPMS sensor tool offers numerous benefits beyond essential tire maintenance.

Here are the key reasons why it is necessary:

Safety: Tire pressure is crucial for vehicle stability, handling, and braking efficiency. Under-inflated tires can lead to increased stopping distances, reduced grip on the road, and a higher likelihood of tire blowouts, all of which can cause accidents.

Fuel Efficiency: Tires with correct pressure reduce rolling resistance, leading to better fuel economy.

According to the U.S. Department of Energy, maintaining the proper tire pressure can improve your vehicle's gas mileage by up to 3.3%.

Tire Longevity: Consistently maintaining the correct tire pressure helps prevent uneven tire wear, extending your tires' life. This saves money on replacements and ensures a smoother and safer ride.

Environmental Impact: Proper tire maintenance contributes to lower carbon emissions. Under-inflated tires can increase fuel consumption, leading to higher CO2 emissions. By keeping your tires properly inflated, you are reducing your vehicle's environmental footprint.

Cost Savings: Maintaining proper tire pressure reduces the risk of damage to your vehicle's suspension and alignment systems. Over time, this can save you a significant amount in repair costs.

Situations Where a TPMS Sensor Tool is Essential

A TPMS sensor tool is not just for emergency use. Here are several situations where this tool proves invaluable:

Regular Maintenance: Routine tire pressure checks can prevent issues before they arise. Using a TPMS sensor tool during regular maintenance helps you stay ahead of potential problems.

Seasonal Tire Changes: When switching between summer and winter tires, a TPMS sensor tool can ensure that all new tires are correctly programmed and functioning.

Long Road Trips: Before embarking on a long journey, using a TPMS sensor tool to check tire pressure can give you peace of mind and enhance safety.

After Tire Repairs or Replacements: If your tire is repaired or replaced, a TPMS sensor tool can help you ensure the new or repaired tire is calibrated correctly and safely.

Rental or Second-Hand Vehicles: If you are using a rental car or have recently purchased a second-hand vehicle, a TPMS sensor tool can verify that the tires are in good condition and inflated.

How to Use the Foxwell GT60 Plus TPMS Sensor Tool

Using a TPMS sensor tool may seem daunting at first, but with the proper steps, it becomes straightforward. Here's a step-by-step guide to help you through the process:


Gather Necessary Tools: Ensure you have the Foxwell GT60 Plus TPMS sensor tool, your vehicle's user manual, and any specific instructions from the TPMS tool manufacturer.

Check Battery: Make sure the TPMS tool's battery is fully charged to avoid interruptions during the process.

Identify the Sensor Type

Vehicles come with different types of TPMS sensors. Identify if your car uses direct or indirect TPMS. Direct TPMS sensors are installed in each tire, while indirect TPMS uses the ABS to measure tire pressure.

Activate the Tool

Power on the Foxwell GT60 Plus TPMS sensor tool. The tool features a straightforward interface with options to select your vehicle's make, model, and year.

Select the Correct Mode:You can choose the function you need: the sensors' activation, reading, or programming. You'll use the read or check mode for most routine checks.

Scan the Sensors: Starting with the front left tire, hold the TPMS tool near the valve stem and initiate the scan. The tool will communicate with the sensor and provide a readout of the tire pressure.

Interpret the Data: Compare the readings with the recommended tire pressures found in your vehicle's manual. Note any discrepancies.

Program New Sensors: If a sensor needs replacing, use the Foxwell GT60 Plus to program the new sensor. Then, follow the on-screen instructions to sync the new sensor with your vehicle's TPMS.

Relearn Procedure: Some vehicles require a TPMS relearn procedure after checking or changing sensors. This process involves following specific steps to ensure the car recognizes the sensor data correctly.

Common Issues and Troubleshooting

Sensor Not Detected: Ensure the tool is positioned correctly and the sensor is within range.

Incorrect Readings: Check for sensor damage or interference. Re-calibrate the tool if necessary.

Programming Errors: Verify the new sensor is compatible with your vehicle and follow the programming instructions accurately.


Using a TPMS sensor tool is an essential skill for any vehicle owner. It enhances safety, promotes efficiency, and saves costs in the long term.

Following the steps outlined in this guide and utilizing reliable tools like the Foxwell GT60 Plus, you can confidently monitor and maintain your tire pressure, ensuring a smoother and safer driving experience.


What is a TPMS sensor tool?

It monitors and manages your vehicle's tire pressure sensors.

Why is it important?

It ensures safety, improves fuel efficiency, and extends tire life.

How do I use the Foxwell GT60 Plus?

Activate the tool, scan the sensors, interpret the data, and program new sensors if needed.

Reading next

Car Scanner Doctor | Foxwell
Car Doctor OBD2 Scanner | Foxwell

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.