Can an OBD2 Scanner Reveal if the Check Engine Light Was Recently Reset?

Car Scanner Car Doctor | Foxwell
Contents

When buying a used car or maintaining your own, knowing whether the check engine light has been recently reset without addressing the real issue is crucial. In this article, we’ll explore how OBD2 scanners work, why someone might reset the check engine light, how to detect a recent reset, and tips for using an OBD2 scanner effectively.

How Does an OBD2 Scanner Work?

Bidirectional Control Car Scanner | Foxwell

An OBD2 scanner is a tool that connects to your vehicle’s computer system to read diagnostic information, especially fault codes related to engine and emissions issues. When the check engine light comes on, it signals a problem that the car’s computer has detected.

An OBD2 scanner allows you to retrieve these fault codes, helping to identify what’s wrong with the vehicle. Advanced models, like the Foxwell NT909, can read not only engine codes but also deeper systems like transmission and ABS, providing a more comprehensive vehicle check.

Why Would Someone Reset the Check Engine Light?

People reset the check engine light for different reasons:

  • After Repairs. Ideally, the light is reset after a repair has been completed. If the issue, such as a faulty sensor, is fixed, the light is cleared to show that the car is in good working order.
  • To Hide a Problem.Some people reset the check engine light to mask ongoing problems, especially when selling a used car. This temporarily turns off the light and hides the issue until it resurfaces later, possibly after the sale.
  • Temporary Fix. Sometimes, a reset is a short-term solution to avoid dealing with the problem right away, or to pass a vehicle inspection. However, if the problem isn’t truly fixed, the light will come back on.
  • Accidental Reset During Maintenance. Routine maintenance, like replacing a battery, can unintentionally reset the light. While this isn’t intentional, it can still leave unresolved problems hidden.

Can an OBD2 Scanner Detect a Recently Reset Check Engine Light?

Yes, an OBD2 scanner can give you clues that the check engine light was reset. While it won’t directly say "this light was reset recently," it can show signs like incomplete readiness monitors, which are tests that your vehicle runs to check if systems are working correctly.

When the light is reset, these monitors are cleared and need time to rerun. If many of the readiness monitors show as incomplete, it’s a strong indication that the check engine light was recently reset.

How to Use an OBD2 Scanner to Check for Hidden Issues

If you want to ensure a vehicle’s check engine light hasn’t been recently reset to hide issues, here’s how to use an OBD2 scanner effectively, particularly with a tool like the Foxwell NT909:

Plug in the Scanner. Locate the OBD2 port under the dashboard and connect the scanner. The Foxwell NT909 is designed to be user-friendly, with a touchscreen interface that guides you through the process.

Read Fault Codes. The NT909 will scan for fault codes and show if there are any active or pending issues. If the car has no codes but incomplete readiness monitors, it could be a sign that someone cleared the light recently.

Check Readiness Monitors. Look at the status of the readiness monitors. If many are incomplete, it’s a strong indication that the check engine light was reset, and the car hasn’t gone through its internal tests to verify if everything is functioning properly.

Perform a Full-System Scan. The Foxwell NT909 can also check deeper systems beyond just the engine, such as ABS and airbag systems, allowing you to detect any hidden issues that may not trigger the check engine light.

Monitor Live Data. The NT909 can display live data from the vehicle’s sensors, giving you real-time insight into how the car is performing, which helps detect problems that haven’t yet triggered the check engine light.

Signs That the Check Engine Light Was Recently Reset

Here are key signs that the check engine light was recently reset:

Incomplete Readiness Monitors: When someone resets the check engine light, the vehicle’s internal tests are also reset. An OBD2 scanner will show if these tests, known as readiness monitors, are incomplete. If most monitors haven’t finished, it suggests the light was reset recently.

No Active or Pending Codes, but Incomplete Monitors: If the scanner shows no fault codes, but the readiness monitors are incomplete, it could mean the problem hasn’t had enough time to reappear, indicating a recent reset.

Light Comes Back On After Driving: If the check engine light returns after a test drive, it’s likely that the reset was done to temporarily hide an issue that hasn’t been properly resolved.

What is the “Readiness Monitor” and How Does it Help Detect Resets?

The readiness monitor checks whether the vehicle’s systems are functioning properly. When the check engine light is reset, these monitors are cleared and need time to rerun.

An OBD2 scanner can show whether these tests are complete or still pending. If many are incomplete, it suggests the car hasn’t been driven long enough after a reset for the system to fully check itself. This is one of the best indicators that the light was recently reset.

Battery Replace Car Scanner | Foxwell

Tips for Buying a Used Car: Using OBD2 to Check for Engine Light Resets

When shopping for a used car, using an OBD2 scanner can protect you from purchasing a vehicle with hidden issues. Here’s how to use it effectively:

  • Bring an OBD2 Scanner. Always take an OBD2 scanner, such as the Foxwell NT909, when looking at a used car. It can provide valuable information on the car’s health and whether the check engine light was reset.
  • Scan for Fault Codes. Plug in the scanner and check for any fault codes. Even if the seller claims the car has no problems, hidden issues may appear in the scan.
  • Check Readiness Monitors. Look at the status of the readiness monitors. If many are incomplete, ask the seller if the car’s check engine light was recently reset, and request documentation of any repairs.
  • Test Drive the Car. After scanning the vehicle, take it for a test drive to see if the check engine light comes back on. If it does, this confirms that a reset was done to temporarily hide the issue.
  • Request Maintenance Records. Incomplete monitors or cleared fault codes should come with proof of recent repairs. If the seller doesn’t have maintenance records, it’s a red flag that the issue may not have been fixed properly.

Conclusion

An OBD2 scanner is an essential tool for detecting whether a vehicle’s check engine light has been recently reset. By checking fault codes and readiness monitors, you can uncover hidden problems and ensure the vehicle is in good condition.

Whether you’re maintaining your own car or purchasing a used one, using an advanced tool like the Foxwell NT909 provides critical insights into the vehicle’s true health, helping you make informed decisions and avoid costly repairs.

FAQs

Can you tell if someone cleared a check engine light?

Yes, an OBD2 scanner can reveal if the check engine light was recently reset by checking the readiness monitors. If these monitors are incomplete, it's a sign the light was cleared recently.

Can an OBD2 scanner reset the check engine light?

Yes, an OBD2 scanner can reset the check engine light by clearing the fault codes stored in the vehicle’s system.

Can you use a code reader if the check engine light is off?

Yes, you can use a code reader even if the check engine light is off. It can still detect stored or pending fault codes that haven't triggered the light yet.

You Might Also Like

Reading next

Car Scanner One Enough | Foxwell
Car Scanner Car Doctor | Foxwell

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.